Vivacolor Snickeri Putty Tape for Interior Work

VIVACOLOR Wood and Metal Putty for Interior - Ready to use, specially fine-grained putty for wood and metal surfaces such as doors, furniture, window frames, etc. in dry interiors. Creates a particularly smooth surface, has good adhesion to the treated surface, and prepares the surface well for further treatment with paint. White. Suitable for leveling surfaces of wood, fiberboard, and metal in dry interiors. Suitable for leveling surfaces of doors, furniture, window frames, etc. The putty creates a very dense and smooth surface.

Consumption: approximately 1 l/m2 (1mm thick layer)

PREPARATION

Untreated surfaces: Clean the surface from dust and dirt. Wash greasy surfaces with Special Clean detergent, rinse with water, and let it dry. Prime wood and fiberboard surfaces with Special Primer and metal surfaces with Universal Korrostop or Universal Korrostop+.

Previously painted surfaces: Clean the surface from old paint layers, dust, and dirt. Wash greasy and previously painted surfaces with Special Clean detergent, rinse with water, and let it dry. Sand glossy surfaces to a matte finish and wipe off sanding dust. Prime wood and fiberboard surfaces with Special Primer and metal surfaces with Universal Korrostop or Universal Korrostop+.

APPLICATION CONDITIONS The surface must be clean and dry, air temperature above +5 °C, and air relative humidity below 80%. Avoid drafts and high temperatures during painting.

APPLICATION Apply the putty with a putty knife. Sand and wipe off the puttied surface after drying. It is recommended to use eye protection and a dust mask during sanding. Apply a second layer of putty if necessary.

CLEANING OF TOOLS Clean the putty from the tools and rinse them with water.

ENVIRONMENTAL PROTECTION, WORK SAFETY, AND WASTE DISPOSAL Do not pour the product into the sewage system, water bodies, or soil. Dispose of dry and empty containers in accordance with local regulations.