Weber Floor 200 Rapid self-leveling compound for renovated floors (5-30 mm) 20kg

Self-leveling compound for renovating floors (5-30 mm). Quick-setting building mixture for repairing cracked or damaged floor substrates, as well as for constructing gypsum board and other floating floor structures. The result is a ready-to-install smooth surface for finishing. The innovative composition of the product with reduced pH level protects against the breakdown of adhesives used for installing the finishing floor covering, ensuring a healthy microclimate in the room. Can be applied on heated substrates. Suitable for application on concrete, stone/ceramic tiles, wood, gypsum board, PVC, and synthetic resin substrates. Compressive strength: ≥ 30 N/mm2. Can be applied on substrates with tensile strength above 0.5 MPa and relative humidity below 95%. Applied with a trowel or mechanically with a pump. Application temperature: +10…+30°C. Compressive strength: 30 MPa. Layer thickness: 5-30 mm. Water dosage: 6.5-7 liters / 25 kg. Working time after mixing with water: 20-30 minutes. Drying time: until light foot traffic - 2-4 hours, until next layer application or finishing - 1-2 days. Certified EPD environmental declaration. Quick-setting. Reinforced with fibers. Self-leveling, no need for sanding. Resistant to wear. Low carbon footprint and pH level. Industrially prepared building mixture - ready for application by adding water. Moisture-resistant, with low alkalinity, without casein. Suitable for all types of floor finishes. Self-leveling, reinforced with fiberglass mesh, easy and quick to apply. Not suitable for outdoor use. Not to be used without a surface covering.