Weber M 100/600 Plaster Primer

Weber (Vetonit) masonry mortar M 100/600 (formerly Vetonit M 100/600) is suitable for building load-bearing structures and partition walls using ceramic concrete, concrete, lightweight concrete blocks, or clay and silicate bricks. Compressive strength: 8 Mpa. It is an industrially prepared building mixture - ready for use by adding water. It is easy and quick to work with.

Only mix the dry mixture with clean water. Do not add more water than indicated - it will reduce the quality of the mixture. Mix for approximately 3-5 minutes until a workable, homogeneous mass without air bubbles and lumps is obtained. Let the mixture stand for about 3-5 minutes, then mix again.

• Weber M100/600 covers in a layer of 10-18 mm thickness.
• When laying blocks, it is most convenient to apply the mortar with the universal Fibo trowel. It facilitates the creation of consistent joints and ensures uniform thickness and width of the joint throughout the entire masonry process.