Weber LR + Finishing Plaster 20kg

Weber (Vetonit) LR + fine filler is a Finishing putty for dry rooms (based on polymer adhesive). For leveling walls and ceilings in dry rooms. Can be applied manually or mechanically. Suitable for plasterboard panels and all types of mineral substrates, plastered/leveled with materials based on cement or gypsum. Surface priming is not necessary (except for monolithic concrete). Industrially prepared mixture - ready for application by adding water. Vapor-permeable, breathable. With good adhesion, easy to sand. Quick and easy to apply.

Consumption: 1.2 kg/m2 (in a 1mm thick layer)

The substrate to be treated must be stable, dry, and free from substances that weaken adhesion: dust and oils. For leveling large unevenness (>10 mm), use the fine, fast-setting repair putty Weber S 06 (formerly Vetonit S 06) or the fast-setting concrete Weber S 30 (formerly Vetonit S 30). Moisten very dry surfaces. Mix the dry mixture only with clean water. Do not add more water than indicated - it will reduce the material's adhesion properties. Mix for about 3-5 minutes until a workable, homogeneous mass without air bubbles and lumps is obtained. Let the mixture stand for about 10-15 minutes, then mix again. When applying multiple layers, make sure the previous layer is completely dry and hard. Sand the surface before applying each subsequent layer.

Color: whiteLayer thickness: 1-3 mmGrain size: 0.3 mmConsumption: 1.2 kg/m2/mmWater addition: 9 liters / 25 kg (1.8 liters / 5 kg)Working time after mixing with water: 24 hoursDrying time: up to 24 hoursApplication temperature: +10…+30CPackaging: 2 kg, 5 kg, and 20 kgShelf life: 12 months