KNAUF Metal plasterboard profile CW

KNAUF CW metal profile - Dry construction steel profile for partition walls, wall cladding and freely suspended ceiling structures. Durable Knauf CW profiles are the backbone of walls and partitions. The wider the profile back, the better it can support higher walls and wider ceilings. Designed for interior work. CW profiles can be cut with electric or manual shears. They are attached to the structure with screws or dowels, or freely inserted into the structure.

Properties:

• Profile height: 50 mm, nominal thickness 0.6mm. Complies with EN 14195 and meets the requirements of DIN 18182:1:2007-12, which define the profile thickness. Every 50 cm there are H-shaped punches that can be opened inside the profile to allow for the passage of smaller pipes, cables and wires. Gypsum boards are attached to the 50 mm wide edges of the profile, which are marked with a groove in the middle. CW profiles can be extended by connecting them together.
• Complies with EN 14195 and meets the requirements of DIN 18182:1:2007-12, which define the profile thickness
• Every 50 cm there are H-shaped punches that can be opened inside the profile to allow for the passage of smaller pipes, cables and wires
• Gypsum boards are attached to the 50 mm wide edges of the profile, which are marked with a groove in the middle
• CW profiles can be extended by connecting them together
• Profile height: 50 mm, nominal thickness 0.6mm. Complies with EN 14195 and meets the requirements of DIN 18182:1:2007-12, which define the profile thickness. Every 50 cm there are H-shaped punches that can be opened inside the profile to allow for the passage of smaller pipes, cables and wires. Gypsum boards are attached to the 50 mm wide edges of the profile, which are marked with a groove in the middle. CW profiles can be extended by connecting them together
• Profile height: 50 mm
• Nominal thickness 0.6mm