Ready-to-use dispersion coating based on silicone emulsion. Application Ready-to-use dispersion coating based on silicone emulsion for interior and exterior work. It is used as a finish for: thermal insulation systems Capatect STANDARD A and B; concrete (without coating); gypsum plaster; mineral plastered or filled surfaces with sufficient load-bearing capacity; existing dispersion paint and varnish coatings with sufficient load-bearing capacity. Properties with high vapor permeability hydrophobic, resistant to pollution, resistant to mechanical loads, almost non-combustible, elastic, resistant to external environmental effects and UV-friendly, does not contain solvents and plasticizers, resistant to alkali, easy to apply and structure. Colors Natural white. Tintable using the Color Express system. NOTE: colors with a light reflectance coefficient (HBV) < 25 are not intended for standard thermal insulation systems Capatect STANDARD A and B. Due to the use of natural additives, differences in shades are possible, but this is not a product defect. Taking this into account, only materials with the same batch number should be used on one treated surface. Materials with different batch numbers should be mixed before starting work. Density 1.77 g/cm³ Diffusion equivalent air layer height sdH2O max. 0.4m Binder base Silicone emulsions, polyacrylic emulsions Adhesion base ≥ 0.3 MPa Thermal conductivity coefficient ≤ 0.80 W/(m✱K) Water permeability (w-value) W2 Water vapor permeability (sd-value) V2 Reference VOC content in accordance with Directive 2004/42/EC < 10 g/l