Caparol ThermoSan Facade Plaster NQG

CAPAROL ThermoSan Facade Plaster NQG - Self-cleaning silicone textured plaster for exterior use. Ready-to-use, structured plaster with Nano quartz grid technology. Suitable as a finishing coat on - Capatect thermal insulation system B; Capatect thermal insulation system OrCa; Capatect suspended facade system B; Untreated concrete; PII and PII group base plasters according to DIN 18 550; Matte dispersion paint coatings with good adhesion; Silicate coatings with good adhesion.

Not suitable for substrates with salt deposits, as well as synthetic or wooden substrates.

Properties

- Low consumption- High water vapor permeability- Good color resistance- Resistant to adverse weather conditions, water-repellent- Flexible application- Environmentally friendly, without unpleasant odor- Silicate organic-hybrid dispersion binder base- Dilutable with water- Plaster contains preservatives that provide protection against pests, fungi and algae damage- Various design options, thanks to different grain sizes

Packaging

Buckets with 20 kg content.

Color shades

White. Other shades can be ordered from the factory, using CaparolColor, Caparol 3D and A1 color charts as a basis. Other special shades with lightness level > 20 - upon request. (if lightness level < 20, the material is not suitable for use on thermal insulation systems). With CarboNit or CarbonSpachtel reinforcement compound, it is possible to tint up to a lightness level ≥15. In the "Edition Carbon Dark Side" system, it is possible to tint up to a lightness level ≥5. In the case of tinting with dark shades in the DarkSide system, based on the contrast ratio between the reinforcement layer and the surface plaster, an additional legalization coat with ThermoSan is required. It is possible to tint in small quantities, also using CaparolColor (formerly Alpinacolor) or Amphibolin full-tone and tinting colors. In this case, do not add more than 2% of color, otherwise the consistency will be too liquid.

Gloss level

Matte.

Storage

In a cool place, but protect from frost and direct sunlight.

Technical data

- Density: approx. 1.3 g/cm³

- Diffusion equivalent air layer thickness s_dH²O <0.07m

- Water absorption coefficient w < 0.1 kg/(m².h^0.5)

- Consistency paste consistency

Maximum grain size

< 100 µm, S₁

Density

Density: approx. 1.3 g/cm³

Dry film thickness

100 - 200 µm, E₃

Water permeability quantity

< 0.1 [kg/(m² · h^0.5)] (low), W₃

Water vapor permeability (sd value)

< 0.14 m (high), V₁

Additional products

AmphiSilan-Grundierfarbe