Akumulatora Triecienskrūvgriezis/Triecienurbjmašīna Festool TPC 18/4 I-Basic, 18V + Dāvanā Akumulators BP 18 Li 5.2 ASI (577053)

Tīra jauda, ​​dozēta 4 pārnesumos.
Spēcīgs. Daudzpusīgs. Ar 4 pārnesumiem katram darbam. Ar labāko pārslēgšanās koncepciju, kādu jebkad esat izmantojis. Neatkarīgi no koka, metāla vai, pateicoties pārslēdzamajam aksiālajam triecienam, arī no mūra: TPC ir ārkārtīgi izturīgs, un ar tā bezsuku EC-TEC motoru ir milzīga noturība un izturība. Daudzie stiprinājumi kopā ar perfekti saskaņotiem piederumiem padara QUADRIVE par nepārspējamu triecienurbjmašīnu visdažādākajām vajadzībām. Un bīstama plaukstas izmežģīšana pēkšņas ievietošanas rīka bloķēšanas gadījumā? Mūsu inteliģentais KickbackStop minimizē risku. Izmēģini: labākā triecienurbjmašīna, ko Festool jebkad ir uzbūvējis!

Jaudīgs skrūvēšanas un urbšanas darbiem ar lielu diametru, ātru, tīru darbu veikšanai ar mazāku diametru. Maksimāla jauda: pateicoties ārkārtīgi jaudīgajam, bezsuku un tāpēc ilgstošajam EC-TEC motoram. Izturība: pamatīgs 4 pārnesumu metāla reduktors, turklāt pilnībā nodrošināts, pateicoties visaptverošiem Festool servisa pakalpojumiem. Vēl plašāks lietojums: papildus ieslēdzami aksiālie triecieni spēcīgai urbšanai mūrī. QUADRIVE ar 4 pārnesumiem plašam lietojumam: no skrūvēšanas ar 50 Nm griezes momentu 1. pārnesumā līdz precīzai urbšanai ar 3.600 apgr./min 4. pārnesumā. Daudzpusīga: FastFix ligzda ļauj bez instrumentiem ātri regulēt uz urbšanu, skrūvēšanu, urbšanu leņķī un skrūvēšanu leņķī. Dziļuma ierobežotājs un ekscentriskais stiprinājums arī ļauj skrūvēt tuvu malai ar ierobežotu dziļumu. Elastīga akumulatora sistēma: darbos ar lielu jaudas patēriņu 4,0 Ah Li-HighPower Compact akumulatoru bloks nodrošina ideālu spēka, kompaktuma un viegluma kombināciju. Ja vēlaties vēl lielāku jaudu, īpaši smagos urbšanas un skrūvēšanas darbos pareizā izvēle ir 5,2 Ah akumulatoru bloks. Pilnībā aizsargāts: protams, ka arī uz akumulatoru bloku attiecas visaptverošie Festool servisa pakalpojumi. Mobilitāte: Systainer³ ietver QUADRIVE – un tādējādi to var lieliski integrēt automobiļa apakšdaļā, lai to varētu ērti pārvietot no darbnīcas uz būvlaukumu.

For greater safety when working
The electronic KickbackStop prevents your wrist from twisting dangerously if the drill suddenly becomes caught or jammed, therefore ensuring improved safety when working.

The QUADRIVE – four gears, with the right one for every application
1st gear: Demanding tightening of screws up to 10 mm. 2nd gear: Quick screwdriving up to 8 x 300 mm in size. 3rd gear: Powerful drilling with auger bits of up to 20 mm. 4th gear: Quick drilling with medium and small drill bits up to 35 mm, for example Forstner drill bits.

Optimised gear switching
Fast, safe, direct! Switching in any direction – from any gear straight to any other, without intermediate stages. Fixed stops ensure clear engaging. Fast downshifting possible as required.

Increased power in 2nd gear
40% more torque compared to the previous model for full traction with 8 mm screws.

QUADRIVE: Unique system width and perfect system compatibility
Thanks to the smart FastFix interface, you can use all of the 18 V attachments from the Festool range and therefore benefit from the system advantages. No other cordless percussion drill has such varied possible uses!

CENTROTEC tool chuck – for even more speed at construction sites
For instantly changing between drilling, countersinking and screwdriving: The CENTROTEC tool chuck, which has proven itself since 2001, is a chuck and bit holder in one. Even though it is half the size and weighs 80% less than a standard chuck: A real Festool invention with the usual Festool quality.

Latest generation of brushless EC-TEC motors
The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery. The latest generation of EC-TEC motors provides more torque and speed under load.

Practical attachments with quick angle adjustment
Very quick angle adjustment simply by rotating the green ring. The attachment no longer needs to be released from the machine. Even the eccentric adapter for screwdriving close to edges is equipped with quick angle adjustment.

Convenient for day-to-day use
Optimised torque adjustment to prevent accidental adjustment. A robust belt clip that can be attached on both sides and a bit holder for secure and magnetic bit storage at the side of the drill.

Perfect ergonomics – both compact and powerful
Thanks to its smaller circumference, the optimised handle ensures improved ergonomics and easier handling.

Extra mobile with vehicle integration
The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

Sophisticated in every detail – including for left-handed people
For left-handed people, the Work App can be used to reverse the right-hand/left-hand selector switch such that the switch no longer causes disruption by protruding into the handle area during the main application – in clockwise rotation.

IoT via Work App
When operated with a Bluetooth® battery, software updates, repair orders for servicing and many other functions can be used.

Optimal lighting – can also be controlled via the Work App
With LED light that can be switched on for precise work even in the darkest of corners. Brightness and lighting duration can also be set via the Work App.