Robots Putekļu Sūcējs Karcher RCV 3 Ar Mazgāšanas Funkciju Balts (1.269-620.0)

ROBOT VACUUM CLEANER WITH WIPING FUNCTION RCV 3
The smart RCV 3 with precise LiDAR navigation and convenient app control cleans low-pile carpets and hard surfaces fully autonomously and systematically. Hard surfaces can also be wiped when wet.

More time for the enjoyable things in life: the smart RCV 3 cleaning robot takes over the floor cleaning. Once started, the RCV 3 robot systematically and independently cleans your hard floors and low-pile carpets. Dry dirt is reliably transported into the built-in waste container by the rotating brush, the side brush for the edges and the fan. Where needed, the RCV 3 doesn't just vacuum, but can also damp mop. As the battery capacity decreases, the RCV 3 can charge itself regularly and, after the work is done, it always returns to the charging station. Via the app, the RCV 3 is sent on an exploration tour and will automatically create a map of the rooms by detecting the surroundings (LiDAR). Individual cleaning parameters can be set for every room. For example, which rooms should be vacuumed, mopped or not cleaned. Additional sensors prevent the device from falling, for example, down stairs. For cleaning tasks, the RCV 3 can be conveniently started via the app, using a preset individual schedule or by pressing a button on the device. If the cleaning robot needs help, in many situations it will tell you via voice output.

Wet mopping
For even better cleaning results, the RCV 3 can also damp mop. If needed, use the wiping unit with microfibre cloth, fill the fresh water tank and you are ready to go. The RCV 3 cleaning robot can either be used for dry cleaning only, for wet mopping only, or with both options together in the combined cleaning mode.

Precise navigation
LiDAR sensors on the RCV 3 allow it to be very precise when recording the rooms and create detailed mapping for safe cleaning. With its fast and robust LiDAR navigation, the RCV 3 scans your rooms and thus has the best maps to navigate safely and reliably through rooms even in the dark.

Fall sensors
The fall sensors reliably prevent the RCV 3 from falling down steps or drops. The sensors scan the floor. If a large drop is detected, the controller receives a signal triggering the robot to turn around.

Equipment

• autonomous cleaning
• Cleaning brush
• Side brush, 2 x
• Filters, 2 x
• Cleaning tool
• Wiping unit
• Wiping cloth, 2 x
• 2-in-1 waste container including fresh water tank
• Waste container
• Fall sensors
• Charging station
• operation using app
• Wi-Fi
• Voice output
• Laser navigation system (LiDAR)
• Timer program, several timers possible
• Cleaning modes, Dry cleaning, Wet cleaning, Combination cleaning (wet and dry),
• Automatic system, Spot