Akrila Šuvju Atjaunotājs Mapei Ultracare Fuga Fresca 130 (Jasmīnu) 0.160kg

Fuga Fresca is a ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of cementitious grout joints between tiles.

Some application examples

Fuga Fresca is used to eliminate irregularities in the colour of grout-joints caused, for example,
by incorrect application of the mortar, or to eliminate unsightly stains caused during use.

TECHNICAL CHARACTERISTICS
Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean.

RECOMMENDATIONS
Do not use for external applications or on surfaces subjected to continuous immersion  (swimming pools, basins, etc.).

If the product is used on terracotta floors or on stone material with a porous, absorbent surface, it must only be applied on the joints to avoid staining the tiles.

Apply the product on cementitious joints which have been cured for at least 48 hours. Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethanebased products.

Do not use Fuga Fresca to consolidate friable grout or those with poor mechanical strengh
due to inadequate hydration.

If the colour difference between the original colour and the new colour is too great, it may
be necessary to apply more than one coat.

APPLICATION PROCEDURE

Shake the canister well before use. Unscrew the cap and apply the product by pressing the
sponge applicator lightly on the surface of the joints, which must be clean and free of loose
parts, mould and calcium deposits. Wait a few minutes until the product applied on the joints is
dry. Remove any traces of the product from the edges of the tiles using a damp sponge. After
use, thoroughly clean the sponge applicator on the canister